-40%

R-Hop + Modify Baton Flat-Hop Bucking Hard Type + S-Nub Airsoft RHop Hopup Nub

$ 4.74

Availability: 8676 in stock
  • Item must be returned within: 60 Days
  • Return shipping will be paid by: Seller
  • Condition: New
  • All returns accepted: Returns Accepted
  • Restocking Fee: No
  • Modified Item: No
  • Non-Domestic Product: No
  • Country/Region of Manufacture: United States
  • Custom Bundle: No
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Brand: Elvish Tac
  • MPN: Does Not Apply

    Description

    Features:
    R-Hop
    ·
    R-Hop is the single most important part in airsoft that extends your effective range to over
    60m/200ft
    . Max range of
    90m/300ft
    can be achieved
    (with M130 spring, 1.7J).
    ·
    We have developed
    a full line of Custom-Cut R-Hops for various Tightbore Barrels
    , I.E., Prommy
    ®
    , PDI
    ®
    , EdGI
    ®
    , Madbull
    ®
    , ZCI
    ®
    .
    NO SANDING is NEEDED
    .
    ·
    Some of these R-Hops are Extremely hard to fabricate due to the
    angled cuts
    , I.E., Prommy Krytac
    ®
    , PDI
    ®
    .
    ·
    Traditional R-Hops are
    1.5mm thick
    and
    airsoft barrels are 1.25mm thick. Thus, sanding is required.
    ·
    Our R-Hops are
    Exactly 1.25mm thick
    . Therefore,
    NO SANDING is required
    .
    ·
    Made of Premium-Grade Silicone Rubber, to produce MAX spin.
    ·
    Cold weather resistant
    .
    ·
    Proudly Made in
    U
    S
    A
    .
    Flat-Hop Bucking
    ·
    Modify
    ®
    Baton Flat-Hop Bucking (Hard Type
    for better air seal) is a perfect match for R-Hop.
    S-Nub
    ·
    We have developed the S-Nubs (Silicone-Nub). Like our R-Hops, they are made
    specifically
    for certain hopups
    . They just fit and require
    zero cutting
    . Moreover,
    you don't need to flatten the hop arm
    .
    ·
    R-Hop is extremely effective at hopping BBs. So normal nubs are usually too thick for R-Hop, and will result in overhopping even if the hop-dial is at zero.
    ·
    Krytac
    ®
    Prowin
    ®
    Prommy
    ®
    , and Madbull
    ®
    hopups will constantly overhop if the nub is thicker than 1.5mm. VFC
    ®
    & Lonex
    ®
    hopups require 0.8mm nubs for R-Hopping.
    ·
    Thus, the thickness of S-Nub for
    Krytac
    ®
    Prowin
    ®
    Prommy
    ®
    , and Madbull
    ®
    is 1.25mm. The "sweet point" is around half at the hop-dial. S-Nub for
    VFC
    ®
    & Lonex
    ®
    is 0.8mm thick.
    ·
    To use the S-nub, simply remove the stock nub, and drop in the S-Nub. Only 1 piece is needed.
    ·
    FYI, thickness of M-Nub=3mm. Thus, it will overhop unless you flatten the hop arm.
    Dear International Customers
    : Shipping cost to most countries are around

    . Shipping time is around
    2 weeks
    . The item will be claimed as “
    Rubber sample
    ”. Therefore, normally it will not be taxed.
    In 2020, international shipping are delayed by post offices to 1-3 months.
    If you are
    not 100% satisfied
    with our R-Hop within
    60 days
    . Simply use regular mail to send it back it for
    100% refund
    .